About Water Purification Systems...
The CrossFlowMF1.0 sand filter is an innovation of our oldest water filter technology, that of sand filtration. This technology can be applied to many industrial and commercial applications which enable the user to achieve significant energy reductions and or enhanced operational performance of processes using water.
Our high efficiency media filter enables the filtration of water down to 0.45 micron rather than the accepted 20 micron normally associated media systems. This modular system can be used for flows from 2 m3/hr upwards and is available in Carbon Steel with DWI epoxy coated, SS 304 or SS 316. This sand filter technology (patented) allows for flow rates up to 5 times the normal flow of a 20 micron media filter yet filters down to 0.45 micron. This technology is available for the polishing of most raw or process waters.
Operationally, the CrossFlow filter system utilises a unique patented vortex bed stabiliser which maintains flat bed filtration with high surface turbulence. This ensures that no bio-fouling can be seeded whilst holding filtered contamination in suspension above the media bed. This gives lower pressure drops, longer filtration cycles and shorter backwash making direct savings on operational costs.
- Filtration efficiencies > 99%*
- Five times the flow of conventional media filters
- Filtration down to 0.45 micron
- Small footprint
- High flow rates - with low pressure drops
- Modular construction
- PED 5500
- Working pressures from 2-10 bar
- No bio-fouling
- Uses an advanced media with Zeta potential
- Unique patented technology
* Removal rate of 99.9% have been achieved with closed look systems. Once through filtration efficiencies are up to 86% across the range.
More About Water Purification Systems-->
|
|
Water Purification Filter Client Comments...
"Having literally stumbled across how significant their water consumption was costing them, a specialist steel wire plant, based in the North West, has seen a significant return on investment following Industrial Purification Systems (IPS) having installed water filtration technology which has enabled the plant to reuse its process water. Steve Cupples, managing director of IPS discusses the problem and the solution."
Steel Wire Plant
"North West based Industrial Purification Systems (IPS) has recently completed the installation of high efficiency media filtration in the vehicle wash facility at one of Europe's leading commercial test and validation centres for the automotive and transportation industries."
Millbrook Vehicle Test and Development Facility
"Leading water filtration specialist, Industrial Purification Systems (IPS), has just completed the upgrading of the water filtration technology used to enable Southbank Centre's air conditioning system to run on water extracted from two bore holes."
Southbank Centre
More Water Purification Filter Client Comments-->
|
